Skiff Lift or Heavy PWC Lift

Galvanized Steel Construction
Our patented Skiff Lift provides a quiet 180° rotation on Nylatron® bushings with no metal to metal contact. This allows you to place your skiff or inflatable over the dock for storage or easy service.

Due to the ability to rotate the lift, the Skiff Lift can be easily installed by 1 or 2 people while standing on the dock or sea wall without special equipment (such as a barge or lifting device). In fact, Tide Tamer Skiff lifts were designed to be installed entirely out the water,    "Go here for a larger view"
reducing maintenance and eliminating corrosion and barnacle build-up.
1,200 Lb Skiff Lift | 1,500 Lb Skiff Lift
PWC Lifts Skiff Lifts Aluminum Cradle Lifts Boathouse Lifts
"Go Here" for Prices
Call Toll Free for Technical Assistance or to Place a Order: 866-564-9777
"Click here to see 1200# Skiff / PWC installation instructions"
Capacity 1200# "Go here to view"
Features:
Full 180 degree rotation
Totally maintenance free.
Rotates on Nylatron® bushings, no metal to metal contact
Corrosion-resistant galvanized steel construction (Great for salt water!)
Single piling, dock or seawall mount options
1/2 HP motor will operate on 115V @ 8.0 amps and 220V @ 4.0 amps
8' carpeted bunk boards
1/4" stainless steel cable
Safety pin locks mast in up position and removes tension on cable
10' mast provides 7' travel from dock into water (9' travel optional)
Optional remote control available
Stationary, non swinging mount available
Can handle boats up to 7' wide (8' optional)
Rugged, proven design, with all the parts fully visible for inspection
Piling mount requires a minimum 10" diameter piling, 34" above the dock
Lift comes with 5 step instructions for easy installation. Thirteen bolts total to install. Lift comes mostly pre-assembled. See installation instructions
One year structural warranty.
Three year structural warranty on galvanized units - Ten year structural warranty on aluminum units - Five year warranty on drive units - One year warranty on electrical components


"Go Here for a Larger View"
1,500# Skiff/PWC Lift Swinger

"Click here to see 1500# Skiff installation instructions"

Capacity 1500#
Features:
Full 180 degree rotation
Rotates on Nylatron® bushings, no metal to metal contact
Corrosion-resistant galvanized steel or aluminum construction
(Great for salt water!)
Single piling or seawall mount options
3/4 horse power Hefty Hoist - 3000# capacity rigged for straight pull
Totally enclosed drive assembly
8' carpeted bunk boards
5/16" stainless steel cable
Safety pin locks mast in up position and removes tension on cable
11' mast provides over 7' travel from dock into water
Grease is required only for electric hoist
Stationary, non swinging mount available
Arm length 72" (can handle boats up to 7' wide)
Rugged, proven design, with all the parts fully visible for inspection
Piling mount requires a minimum 10" diameter piling, 48" above the dock
Optional remote control available
One year structural warranty.
Three year structural warranty on galvanized units - Ten year structural warranty on aluminum units - Five year warranty on drive units - One year warranty on electrical components

 

Tide Tamer, Inc.

 

PWC Lifts | Skiff Lifts | Aluminum Cradle Lifts | Galvanized Cradle Lifts | Boat House Lifts
Warranty | Contact Us | Home