SSPPC 4500 Super Deluxe Steel Mount Pontoon Cradle Lift $2,739.00 **IMPROVED FOR 2018**
8500 lb Deluxe Single Line Cradle Lift Kit for Mounting pipe in center of Boat House "Go here to compare our lifts"

• BH-45 4500 lb top of the line hoist With enclosed worm gear, extended worm gear assembly to stop deflection and Aluminum Back Plate. LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• Front and Back Snap Cover for hoist
• GEM GR1 Remote Control
• 1-Galvanized Dual Pipe support with built in Flat-Plate hoist bracket
• 1-Galvanized Dual Pipe Support
• 4 Galvanized 1.5 Ton pulleys with ball bearings and grease zerk (straight line, NO COMPOUNDING "Click Here to learn about Compounding" ) Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 4-4-Steel I-Beam clamps for blocks
• 1 Galvanized Pontoon Boat Cradle with end plates for Pontoon boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
• 4 Guide Posts with padded bumpers
• 4 7/16" 1.5 Ton Galvanized Shackles for easy Cradle Attachment
• Aluminum Cable Winders
• 100' Stainless steel 1/4" cable
• 8 Stainless steel drop forged cable clamps, 4 thimbles and all hardware needed to install kit in boat house*

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and the bunk boards.
  "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

SSPPC 6500 Super Deluxe Steel Mount Pontoon Cradle Lift $2,785.00 **IMPROVED FOR 2018**
8500 lb Deluxe Single Line Cradle Lift Kit for Mounting pipe in center of Boat House "Go here to compare our lifts"

• BH-65 6500 lb top of the line hoist With enclosed worm gear, extended worm gear assembly to stop deflection and Aluminum Back Plate. LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• Front and Back Cover for hoist
• GEM GR1 Remote Control
• 1-Galvanized Dual Pipe support with built in Flat-Plate hoist bracket
• 1-Galvanized Dual Pipe Support
• 4 Galvanized 1.5 Ton pulleys with ball bearings and grease zerk  (straight line, NO COMPOUNDING "Click Here to learn about Compounding" ) Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 4-4-Steel I-Beam clamps for blocks
• 1 Galvanized Boat Cradle with end plates for V-hull boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
• 4 Guide Posts with padded bumpers
• 4 7/16" 1.5 Ton Galvanized Shackles for easy Cradle Attachment
• Aluminum Cable Winders
• 100' Stainless steel 5/16" cable
• 8 Stainless steel drop forged cable clamps, 4 thimbles and all hardware needed to install kit in boat house*

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and the bunk boards.
  "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

SPPC-A 7000 Deluxe Steel Mount Pontoon Cradle Lift Kit with Enclosed Maintenance Free A-Drive hoist $2,499.00 **NEW**
7,000 lb Deluxe Steel Mount Single Line Cradle Lift Kit for Mounting pipe in center of Boat House  "Go here to compare our lifts"
Kit includes:

• 7,000 lb enclosed A-Drive hoist Maintenance free and Up to 40% Faster lift speed than Flat Plate hoists.

• 1-Galvanized Dual Pipe support with built in hoist bracket

• 1-Galvanized Dual Pipe Support

• 4 Galvanized 3 Ton pulleys with ball bearings and grease zerk

• 4-Steel I-Beam clamps for blocks

• 1 Galvanized Pontoon Boat Cradle with end plates for Pontoon boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams

• 4 5/8" 3.25 ton Galvanized Shackles for easy Cradle Attachment.

• 100' Galvanized 5/16" cable

• 8 drop forged cable clamps and all hardware needed to install kit in boat house*

• 1 year warranty on electrical components
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and bunk boards
  "Go Here for Up-grades and Options" , "Go Here for motor and wiring instructions" and "Go Here for installation instructions"

SSPPC-A 7000 Super Deluxe Steel Mount Pontoon Cradle Lift with Enclosed Maintenance Free A-Drive Hoist $3,169.00 **Improved for 2018**
8500 lb Deluxe Single Line Cradle Lift Kit for Mounting pipe in center of Boat House "Go here to compare our lifts"

• 7,000 lb enclosed A-Drive hoist Maintenance free and Up to 40% Faster lift speed than Flat Plate hoists.
• GEM GR1 Remote Control
• 1-Galvanized Dual Pipe support with built in hoist bracket
• 1-Galvanized Dual Pipe Support
• 4 Galvanized  3 Ton pulleys with ball bearings and grease zerk (straight line, NO COMPOUNDING "Click Here to learn about Compounding" ) Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 4-4-Steel I-Beam clamps for blocks
• 1 Galvanized Pontoon Boat Cradle with end plates for Pontoon boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
• 4 Guide Posts with padded bumpers
• 4 5/8" 3.25 ton Galvanized Shackles for easy Cradle Attachment
• Aluminum Cable Winders
• 100' Stainless steel 5/16" cable
• 8 Stainless steel drop forged cable clamps, 4 thimbles and all hardware needed to install kit in boat house*

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and the bunk boards.
  "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

SSPPC 7500 Super Deluxe Steel Mount Pontoon Cradle Lift $3,099.00 **IMPROVED FOR 2018**
8500 lb Deluxe Single Line Cradle Lift Kit for Mounting pipe in center of Boat House "Go here to compare our lifts"

• BH-75 7500 lb top of the line hoist With enclosed worm gear, extended worm gear assembly to stop deflection and Galvanized Back Plate. LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• Front and Back Cover for hoist
• GEM GR1 Remote Control
• 1-Galvanized Dual Pipe support with built in Flat-Plate hoist bracket
• 1-Galvanized Dual Pipe Support
• 4 Galvanized  3 Ton pulleys with ball bearings and grease zerk (straight line, NO COMPOUNDING "Click Here to learn about Compounding" ) Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 4-4-Steel I-Beam clamps for blocks
• 1 Galvanized Pontoon Boat Cradle with end plates for Pontoon boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
• 4 Guide Posts with padded bumpers
• 4 5/8" 3.25 ton Galvanized Shackles for easy Cradle Attachment
• Aluminum Cable Winders
• 100' Stainless steel 5/16" cable
• 8 Stainless steel drop forged cable clamps, 4 thimbles and all hardware needed to install kit in boat house*

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and the bunk boards.
  "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

SSPPC 8500 Super Deluxe Steel Mount Pontoon Cradle Lift $3,299.00 **IMPROVED FOR 2018**
8500 lb Deluxe Single Line Cradle Lift Kit for Mounting pipe in center of Boat House "Go here to compare our lifts"

• BH-85 8500lb top of the line hoist With enclosed worm gear, extended worm gear assembly to stop deflection and Galvanized Back Plate. LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• Front and Back Cover for hoist
• GEM GR1 Remote Control
• 1-Galvanized Dual Pipe support with built in Flat-Plate hoist bracket
• 1-Galvanized Dual Pipe Support
• 4 Galvanized  3 Ton pulleys with ball bearings and grease zerk (straight line, NO COMPOUNDING "Click Here to learn about Compounding" ) Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 4-4-Steel I-Beam clamps for blocks
• 1 Galvanized Pontoon Boat Cradle with end plates for Pontoon boats up to 12,000lbs, available in 9 or 10ft widths 6" beams (11 or 12ft for a additional $100)
• 4 Guide Posts with padded bumpers
• 4 5/8" 3.25 ton Galvanized Shackles for easy Cradle Attachment
• Aluminum Cable Winders
• 100' Stainless steel 5/16" cable
• 8 Stainless steel drop forged cable clamps, 4 thimbles and all hardware needed to install kit in boat house*

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and the bunk boards.
  "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"